Product Overview
For line designers, the Three‑Point Electrical Pig Stunning Machine provides a restrained or hand‑operated stunning station intended to render pigs insensible before shackling and bleeding. Its value depends on the hand‑off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
The pig is guided into a controlled position. The selected electrical, mechanical or other approved stunning method is applied using verified settings, and the animal is discharged promptly for sticking within the plant's welfare time limit. Cleaning access and safe isolation are part of the operating principle, not optional extras.
Main Features
Calm animal entry and controlled positioning
Settings matched to pig size and local rules
Fast access for the bleeding step
Non‑slip, washable contact surfaces
Emergency release provision
Recording or verification options where required
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P106‑III |
| Application | Which main used to fix and convey living pig for automatic stunning |
| Power | 3Kw |
| Stunning frequency | 50Hz |
| Stunning current | ≤ 5A |
| Stunning time | ≤ 4s |
| Air consumption | ≤ 0.5M³/Min |
| Air pressure | 0.4‑0.6Mpa |
| Loading weight | 100 ± 25Kg |
| Missed rate | ≤ 1% |
| Out size | 6000*100*1750mm(L*W*H) |
| Component and material | 1 . Hot galvanized or stainless steel main frame 2.High‑quality carbon steel sprockets, chains, drive shaft 3.Rubber block 4.Stainless steel protective cover 5.PLC controlling system 6.Photoelectric switches 7.Frequency converter 8.Intermediate relay 9. Low‑voltage electrical |
| Quotation control | The buyer must state the approved stunning method, pig weight range, throughput, restraint layout, local welfare standard, backup procedure and electrical supply. Final settings require competent veterinary validation. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is small, medium and industrial pig abattoirs operating under an approved animal‑welfare procedure. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 300 pigs per hour places the three‑point electrical pig stunning machine between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
