Horizontal Pig Carcass Splitting Saw

For line designers, the Horizontal Pig Carcass Splitting Saw provides a carcass or primal cutting machine that makes a repeatable split or sectioning cut in the pork process. Its value depends on the hand‑off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.

Product Overview

Working Principle

A band, reciprocating blade or circular cutting element travels through the aligned carcass. The operator or automatic positioning system controls the cut path, after which the blade area is rinsed and sterilized according to the plant procedure. Cleaning access and safe isolation are part of the operating principle, not optional extras.

Main Features

Blade format selected for the cut
Rigid carcass or product positioning
Guarded cutting zone
Wash‑down‑oriented construction
Blade change and tension access
Sterilization compatible with the duty cycle

Technical Specifications

Parameter	Reference Value / Buyer Check
Model	E‑P502‑I
Application	Which main used to cut pig carcass into half parts
Rated voltage/Phase/Frequency	380V/3P/50HZ
Power	5.5kw
Saw diameter	Ø750 mm
Capacity	300 Pig/Hr
Out size	415011502000mm(LWH)
Component and material	1) Hot galvanized steel or Stainless steel main frame 2) Stainless steel groove 3) Stainless steel blade
Quotation control	Confirm cut type, product dimensions, hourly capacity, blade specification, motor supply, mounting, extraction or collection needs and whether the machine is manual or automatic.

Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.

Application

The usual application is pig carcass splitting, primal sectioning and downstream pork cutting rooms. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.

Application Case

Illustrative reference case-A regional pork processor planning for 300 pigs per hour places the horizontal pig carcass splitting saw between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.

Advantages

1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.

Horizontal Pig Carcass Splitting Saw FAQ

What information is needed to quote the Horizontal Pig Carcass Splitting Saw?

Confirm cut type, product dimensions, hourly capacity, blade specification, motor supply, mounting, extraction or collection needs and whether the machine is manual or automatic.

Can it be connected to an existing slaughter line?

Usually yes, but a retrofit needs measured drawings. Share the rail or conveyor interface, floor levels, travel direction, available space, utilities and current control method before engineering starts.

Which spare parts should be ordered with the machine?

Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.

Are the published technical figures final?

No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.

How should the equipment be accepted after installation?

Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.