Product Overview
For line designers, the Pig Viscera Synchronous Quarantine Floor Standing Conveyor Machine provides a controlled transfer unit for moving offal, carcasses, crates or cut product between process levels or rooms. Its value depends on the hand‑off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
A conveyor, air stream, lifting carriage or guided chute receives the load at one station and delivers it to the next. Sensors or operator controls coordinate the hand‑off and prevent overfilling. Cleaning access and safe isolation are part of the operating principle, not optional extras.
Main Features
Closed or guarded product path
Capacity matched to the upstream station
Cleanable contact surfaces
Controlled discharge
Jam‑clearing access
Simple interlock with adjacent equipment
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P406 |
| Application | Which main used to transfer pig viscera for inspection |
| Rated voltage/Phase/Frequency | 380V/3P/50HZ |
| Power | 2.2Kw |
| Tray distance | 1200mm |
| Max capacity | 400 Heads per hour |
| Component and material | Stainless steel main frame and white viscera tray (φ500mm) and red viscera tray (φ300mm) Driving device and tension device Viscera automatic out‑put sliding device Tray automatic cleaning and sterilizing device Frequency controlling device |
| Quotation control | Provide product type, piece size, transfer rate, vertical and horizontal distance, inlet and outlet heights, route bends, cleaning method and the required control signals. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is multi‑level pig abattoirs, offal rooms, cutting areas and packing lines with separated process zones. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 300 pigs per hour places the pig viscera synchronous quarantine floor standing conveyor machine between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
