Pig Large-intestine Washing Device

In a pig plant, the Pig Large‑intestine Washing Device serves as a hygienic machine or workstation for transferring, washing, scraping, draining, inspecting or packing edible offal. The final build must match the actual product load, room layout and cleaning routine at site. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.

Product Overview

Working Principle

Offal is loaded into the working area and moved, agitated, scraped or rinsed according to the task. Water and residues leave through a controlled drain or collection point, while cleaned product exits to inspection, chilling or packing. Operators need a clear stop‑and‑recovery routine for a jam, tool change or hygiene break.

Main Features

Separate routing for the specified offal stream
Smooth food‑contact surfaces
Controlled water and residue discharge
Safe access for loading and unloading
Cleaning access around moving parts
Layout compatible with inspection flow

Technical Specifications

Parameter	Reference Value / Buyer Check
Model	HT‑P615
Application	Which main used to collection pig large intestine for cleaning
Out size	800300mm(LW)
Component and material	1) Stainless steel trough (2mm) 2) Stainless steel intestine washing tube(φ50.8mm ) 3) Stainless steel adjustable foot
Quotation control	Identify the organ or product, hourly load, batch size, cleaning result, water pressure, drain, working height and destination after the operation. Do not combine red and white offal routes without a hygiene review.

Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.

Application

The usual application is white‑offal and red‑offal rooms in pig abattoirs and pork processing plants. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.

Application Case

Illustrative reference case-A regional pork processor planning for 120 pigs per hour places the pig large‑intestine washing device between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.

Advantages

1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.

Pig Large-intestine Washing Device FAQ

What information is needed to quote the Pig Large-intestine Washing Device?

Identify the organ or product, hourly load, batch size, cleaning result, water pressure, drain, working height and destination after the operation. Do not combine red and white offal routes without a hygiene review.

Can it be connected to an existing slaughter line?

Usually yes, but a retrofit needs measured drawings. Share the rail or conveyor interface, floor levels, travel direction, available space, utilities and current control method before engineering starts.

Which spare parts should be ordered with the machine?

Start with the normal wear and hygiene parts for this duty: bearings, seals, sensors, chains or belts, nozzles, blades, scrapers, pneumatic parts and electrical protection devices as applicable. The supplier should issue a model-specific list.

Are the published technical figures final?

No. The table records reference information from the citedHTpage. Capacity, power, dimensions, material grade and utilities must be confirmed on the quotation and approved drawing.

How should the equipment be accepted after installation?

Use a documented site-acceptance test covering alignment, guards, emergency stops, interlocks, dry running, representative load, cleaning access, leakage or drainage, operator training and delivery of manuals and spares.