Product Overview
This Automatic Pig Carcass Washing Machine is specified for one practical job: a carcass‑cleaning station that removes loose contamination with controlled water contact before the next process step. A reliable installation begins with correct interface dimensions and a realistic duty cycle. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
The carcass passes fixed sprays, moving nozzles or rotating cleaning elements. Water pressure, exposure time and carcass position are set so the surface is covered without creating unnecessary splash or water use. The upstream machine must not feed faster than the receiving station can clear.
Main Features
Consistent coverage of the target surface
Contained splash and drainage
Wash‑down‑compatible enclosure
Adjustable cleaning time or pressure
Access to nozzles and filters
Interfaces for automatic line operation
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P114 |
| Rated voltage / phase / frequency | 380v / 3p / 50hz |
| Power | 3 *1.5Kw |
| Axis | 3sets |
| Out size | 2400*1800*2710mm(L*W*H) |
| Component and material | 1)‑ Stainless square steel 60X60X4mm,40X40X2mm 2)‑ Stainless steel axis 3)‑ Stainless steel plate 4mm shell 4)‑Stainless steel plate 1.5mm water collection channel |
| Model | HT‑P504‑II |
| Power | 0.75kw |
| Rated flow | 2m³/h |
| Max capacity | 400 heads per hour |
| Out size | 1300*1150*3020mm (L*W*H) |
| Component and material | 1)‑2mm stainless steel shell 2)‑High pressure water pump and water pipe connection 3)‑Electronic control system 4)‑Automatic induction, Washing time adjustable |
| Quotation control | State capacity, carcass size, inlet water quality, pressure, flow, drain location and whether chemical dosing is allowed by the local hygiene plan. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is post‑bleeding, post‑splitting or final carcass‑cleaning positions in pig processing lines. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 200 pigs per hour places the automatic pig carcass washing machine between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
