Product Overview
For line designers, the Pig Bleeding Shackle Unloading Device provides a transfer device that releases a shackle, hook or carcass at a defined point on the overhead handling route. Its value depends on the hand‑off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
A guide, fork or actuated arm engages the moving carrier. At the discharge point it changes the carrier path or lifts the load clear, allowing gravity or a controlled mechanism to place the item on the next conveyor, table or process machine. Cleaning access and safe isolation are part of the operating principle, not optional extras.
Main Features
Repeatable release at the hand‑off point
Rail geometry matched to the existing line
Guarded moving parts
Serviceable bearings and actuators
Manual recovery after a stoppage
Stainless or protected structural options
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P116 |
| Rated voltage / phase / frequency | 380v / 3p / 50hz |
| Power | 1.1Kw |
| Component and material | 1)‑ Hot galvanized or stainless steel C‑beam track 2)‑ Roller chain with pusher dog 3)‑ Hot galvanized or stainless steel φ 60*4mm/ 40×40×4mm special shaped rail 4)‑ φ 10mm stainless steel rob guard rail 5)‑ Low pressure control switches |
| Quotation control | Provide rail section, travel direction, carrier drawing, load range, line speed, discharge height and the exact receiving equipment. A site video is useful for retrofit work. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is rail‑to‑table, rail‑to‑scald and line‑end transfer points in pig slaughter and carcass handling systems. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 300 pigs per hour places the pig bleeding shackle unloading device between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
